Additional label requirements for lime products
In addition to the label requirements under ORS 633.321 (Label requirements for fertilizer, agricultural amendment, agricultural mineral and lime products), the label for a lime product must include the following:
(1) The name of the particular form of lime. Forms of lime may include, but are not limited to, burnt lime, dolomite, ground limestone, lime sludge, shells, sugar lime and waste lime.
(2) The guaranteed analysis, stating the following:
(a) The percentage of calcium oxide (CaO) or calcium carbonate (CaCO).
(b) The percentage of magnesium oxide (MgO) or magnesium carbonate (MgCO).
(c) The total neutralizing capacity expressed in terms of calcium carbonate equivalent (CCE).
(d) The percentage of product that will pass, respectively, a 100-mesh, 40-mesh, 20-mesh and 10-mesh sieve. The mesh size declaration may include a declaration of the percentage of product that will pass additional mesh sizes, but the mesh sizes specified in this paragraph must be included in the mesh size declaration.
(e) The lime score.
(f) The maximum moisture content if the moisture content is more than two percent, expressed in whole numbers as follows: “Moisture content does not exceed _____ percent.” [2001 c.914 §5; 2009 c.97 §3; 2015 c.514 §6]
3 OregonLaws.org assembles these lists by analyzing references between Sections. Each listed item refers back to the current Section in its own text. The result reveals relationships in the code that may not have otherwise been apparent.