2017 ORS 468A.070¹
Measurement and testing of contamination sources
  • rules

(1) Pursuant to rules adopted by the Environmental Quality Commission, the Department of Environmental Quality shall establish a program for measurement and testing of contamination sources and may perform such sampling or testing or may require any person in control of an air contamination source to perform the sampling or testing, subject to the provisions of subsections (2) to (4) of this section. Whenever samples of air or air contaminants are taken by the department for analysis, a duplicate of the analytical report shall be furnished promptly to the person owning or operating the air contamination source.

(2) The department may require any person in control of an air contamination source to provide necessary holes in stacks or ducts and proper sampling and testing facilities, as may be necessary and reasonable for the accurate determination of the nature, extent, quantity and degree of air contaminants which are emitted as the result of operation of the source.

(3) All sampling and testing shall be conducted in accordance with methods used by the department or equivalent methods of measurement acceptable to the department.

(4) All sampling and testing performed under this section shall be conducted in accordance with applicable safety rules and procedures established by law. [Formerly 449.702 and then 468.340]

(formerly 468.360 to 468.405)

Atty. Gen. Opinions

Motor Vehicle Emission Control Inspec­tion Program funding, (1974) Vol 37, p 130

1 Legislative Counsel Committee, CHAPTER 468A—Air Quality, https://­www.­oregonlegislature.­gov/­bills_laws/­ors/­ors468A.­html (2017) (last ac­cessed Mar. 30, 2018).
 
2 Legislative Counsel Committee, Annotations to the Oregon Revised Stat­utes, Cumulative Supplement - 2017, Chapter 468A, https://­www.­oregonlegislature.­gov/­bills_laws/­ors/­ano468A.­html (2017) (last ac­cessed Mar. 30, 2018).
 
3 OregonLaws.org assembles these lists by analyzing references between Sections. Each listed item refers back to the current Section in its own text. The result reveals relationships in the code that may not have otherwise been apparent.